| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Interesting Router table Jigs http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=41150 |
Page 1 of 1 |
| Author: | johnwalkerwaldsmith [ Sat Aug 17, 2013 10:20 am ] |
| Post subject: | Interesting Router table Jigs |
Just bought a new router table and I want to start using the router for than I have in the past. I can think of tons of stuff it could be used for throughout the building prossess but anybody have any cool or interesting uses that may be out of the box? |
|
| Author: | klooker [ Sat Aug 17, 2013 11:09 am ] |
| Post subject: | Re: Interesting Router table Jigs |
I've been using mine for fingerboard tapers, bridge top contours & of course truss rod slots. Don't know how much experience you have with one, but you need to pay close attention to grain orientation & cut in the appropriate direction which means some climb cutting. Kevin Looker |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|